How can I help to make the conversion process go smoothly?


There are many things you can do to help your LPG conversion engineer help you..........


1. Condition of your vehicle prior to conversion

No matter which conversion company you choose, what type or which manufacturer's equipment you ask them to fit, it is best to begin with a properly serviced vehicle. Any problems that exist when running on petrol will still be there when running on LPG. An engine that is 'missing' or running inefficiently for whatever reason will do just that on LPG. The problem will not go away when conversion is complete and faults will be magnified when running on the new fuel. (For instance, some components e.g. spark plugs must be in better than average condition as LPG can be more demanding).



2. Leave your car with some petrol in the tank!

During a conversion we will have to move the car before we begin, and road test it to make sure it performs properly. In the later stages of conversion we must go off and fill the LPG tank(s). During set - up and intialisation of the system we have to run the engine up to temperature. All of the above need petrol, and a lot of delay will result if your car comes in on fumes!


Make sure the boot and back seat are clear (PLEASE!)

We often have to remove the back seats to fit a boot tank. The boot itself will need to be empty to fit either a cylinder or toroidal tank - Heaps of items left in the boot and back seat do not aid this and we'd really like to ensure that nothing gets lost or dusty. Please empty your car!


4. Disarm your alarm before you leave -

As we progress through a conversion we will often have the bonnet, tailgate and all four doors wide open to allow us to do our work, often for 8 hours or more at a time. Modern cars have a lot of interior lights and the battery may soon be low - On some models the alarm will go off because it has sensed a voltage drop, further draining the battery. The result is oftem a lot of noise which can take some cancelling, as many alarms require a compicated sequence to shut them off, but that's at best.

At worst, many modern alarms have the ability to lock all the doors if triggered. If we are working with the bonnet open and ignition keys in place for cranking etc. the keys may be locked in - This has happened many times and has cost many hours. Please disarm the alarm!


5. Make sure we have any special wheel security keys -

Quite often we have to remove the road wheels to fit pipework etc. and we cannot do this if the wheel locking nuts need a key we haven't got......Often costs us and the customer a day's delay as they are at work and cannot drop them off right away!


6. Make sure that you have the Radio security code (if applicable)-

Quite often we need to disconnect the vehicle's battery or it may simply go flat as described in item 4. If you don't have the code you may not be able to get the Radio or similar to work afterward. It's always best to find out first!


Pre - conversion checklist


Engine running OK?

Sufficient Petrol in the tank?

Boot and back seat clear of belongings?

Alarm disabled?

Locking wheel nut key with the car?

Radio security code identified?

Thanks for taking the time to consider these things. They will ensure that your car will be back with you in the shortest possible time, with minimum hassle.




Contact us to arrange the conversion of your vehicle

(Link is currently available only when using Outlook Express browsers).

LP Gas burns cleanly.....

We accept Mastercard We accept Solo cards We accept Visa cards We accept Switch cards


Click here to get a quote for the conversion of your vehicle